Home??/?? Machinery??/?? Blow Molding Machines - by Product??/?? Various barrel series
Please select a product category

PC five gallon pure bucket blow molding machine

Product Description

This machine is a special machine for PC material 5 gallon pure water bucket. The die is a special storage cylinder die for PC material. It is completely made of German technology and has better performance than other domestic manufacturers. It produces transparency and uniformity of the bucket. The degree reached a near perfect level. The machine is fully automated, high energy saving, low noise, fast speed, high efficiency, safe and reliable, and is the only choice for the production of PC buckets. This machine can also be widely used in chemical, petroleum, pharmaceutical, daily chemical, food, lighting, tools, automobiles, motorcycles, shoes, toys, etc., used to blow plastic barrels, chemical barrels, auto parts (water tanks, fuel tanks). , air conditioning air ducts, car tails), toys (wheels, hollow motorcycles, basketball hoops, children's castles), tool kits, vacuum cleaner pipes, stadiums and public car seats. Installation, commissioning, training, perfect quality assurance, full service, let you buy and use two assured.

Product Features:

1. Control system: The operation panel uses a 5.7-inch Chinese human-machine interface touch screen, and all operations, parameter setting, monitoring, product counting, wall thickness control and other visual operations. The device fault self-judgment shows that the operation is simple. Imported Japanese Mitsubishi PLC programmable controller has process parameter storage and transfer function, fast response, accurate positioning, and high stability of the system during operation.

2. Hydraulic system: all imported hydraulic valves, seals, electro-hydraulic proportional control. It has the characteristics of stable and reliable, accurate motion, long service life and fast response.

3. Extrusion system: It adopts hardened gear reduction gearbox and Japan imported Mitsubishi inverter, with screw frequency control, low noise, strong power, stable speed, long service life and energy saving; mixing screw, raw material adaptability Wide, better plasticizing quality, heating barrel and aluminum alloy heater, energy efficient.

4. Die system: It adopts the central injection material storage cylinder type die, and the horizontal bar is shot, which has high stability. The “first in, first out” storage type head has a reasonable and reliable structure.

5. Open and close mold system: pneumatic single-cylinder slide rail, fast and stable, four-plate, high-precision linear guide, hydraulic two-cylinder two-way open and close mold.

6. Type control system: optional Japanese MOOG and domestic 10 to 100 point wall thickness control system

7. Blowing system: optional blowing, side blowing, and upper blowing are optional.

8. Die cutter: Standard pneumatic cutter, fast standard.

9. Safety system: equipped with clamping protection device and light curtain sensing to ensure the safety of equipment and operators.

10. Electrical components: All international high-tech products are selected.

Technical Parameter

Model HT-90PC
Suitable raw materials PC
actual production PC 5 gallon bucket 720 gram weight 1900 / day
PC 5 gallon bucket weigh Based on appropriate strength 600~800g (wall thickness controller control)
Product capacity 1 cavity 5~30L
Extrusion system Screw diameter 90mm
Screw length to diameter ratio 22:1L/D
Screw speed 40r/min
Plasticizing ability 90kg/hr
Number of screw heating segments 4 segments
Die Number of dies 1
Storage tank volume 4L
Storage tank PC material capacity 2kg
Extrusion die diameter 80mm
Die heating section 4 segments
Opening and closing system Number of stations 1
Number of templates 4
Template size 700*700*66mm
Clamping force 180KN
Mold system 1 cavity 1 Cav
Maximum size of molds that can be installed 700*500*500
Lifting system Turbine reducer 4
power power supply 220~380V,3相50~60HZ
Screw motor power 30Kw
Opening and closing mode hydraulic motor power 7.5kw
Wall thickness control servo hydraulic motor power 4kw<
Screw heating power 10kw
Die heating power 5kw
Hopper dryer 4.5Kw
Fan power (4) 0.12*4=0.48kw
Total installed capacity 58kw
The actual power of the host 20kw / hour
Water source External water source
Air pressure 0.8Mpa
Gas usage 0.5m3/ min
Host size 3910*2060*3190mm
Auxiliary equipment Low pressure air compressor 1 (required) 0.8m3/min; 1.25mpa;7.5kw;0.32m3
1 gas storage tank 0.42m3/ 0.8Mpa
Oil and water dual-purpose mold automatic temperature control machine 1 Heating power 4.5KW / motor power 0.5KW
The above three auxiliary devices can be used without any additional auxiliary equipment.

Submit Inquiry

Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.

Send Message
国产自拍欧美精品日韩精品,亚洲AV 欧美AV 日韩AV 综合,中文字幕极速在线观看,日本无码在线一区二区三区